I use mostly bezel settings in my work. I make my rings so that the bezel is flush with the band and does not sit atop of it for a more integrated look. Having the bezel setting taper allows for a bigger stone to be set while still allowing the bands to sit closer together for stacking rings. Being mostly self taught, I looked to the google first to see if I could find a tutorial on how to make these types of bezels. There were none to be found. I did find a rather heavy bezel block that is used to make these tapered bezels and bought it, but alas, it did not come with instructions. After many failed attempts to make a cylinder turn into a cone, I figured I must be doing something horribly wrong. Wouldn't you know it, there was math involved, much to my dismay. I am going to show you the process I have come to for making this little tapered bezel step by step. Except for the math part ( you will need that to make your template), it is simple. I did come across this nifty cone ca
Comments